Axles
#1
Senior Member
Thread Starter
Join Date: Apr 2009
Location: New Waverly, Tx
Posts: 954
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Axles
First Post. Hello everyone. Question? I have 1997 cherokee sport with rubicon 4.5" superflex, would YJ spring over axles bolt on. Or would some fab. have to be done. The front is a dana 30 the rear is a Ford 8.8. Thanks
#2
Registered Users
Join Date: Mar 2009
Location: Pa
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
The rear should work
edit....read below post
Last edited by Cherokee 4.0; 09-12-2009 at 10:27 PM.
#3
CF Veteran
Well you would have no coil buckets on the front axle, and unless that axle's internals are modded, your Dana 30 is no different. I'm not sure what the spring perch width is on a YJ, but that along with shock mounts could be the only problem on the 8.8.
#4
Senior Member
Thread Starter
Join Date: Apr 2009
Location: New Waverly, Tx
Posts: 954
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
axles
Thanks for the info. Yes the front is modif. 4.10 with a lock rite. the guy who has them said that the spring pads width is 42" to the outside for the rear axle. I cant measure mine rt now as it is in Houton tx getting a new engine. Both axles have lockers and 4.10's. He wants a 1000.00 for the set. Wondering if thats a good price.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)