black96xj

i just ordered a factory fit cup holder for my 96 cherokee off of 4wd.com for 12 bucks shiped

black96xj

heres a pic it screws into the factory holes on the center console and fits around the parking brake lever

Bent/Bolt

Thanks,i will get one

LCFRJEEP

It's ok at best. I have one in my rig and as long as it's a can of soda your all good. Anything else just wont hold. You also have a hell of a time setting your e-brake because you cant get it all the way in the up position due to the cup holder design. Good Luck!!

marvinsc

I've not heard good reports about those.

caged

yup, for 3 years i didn't have a single cup holder in my xj.
then i ordered one from the dealer, and they sent me one for a 97+. it wasn't the one i wanted, but installed it anyway. i kinda just snapped it under the shifter bezel. works great and better than that one.

but i also picked one of those ones up from a shop here that actually had it on the shelf for 12 bux.

so now i have four, yup 4 cup holders. woot.

BowtieGuy3

Since we're on this topic...
Anyone swap a late model center console in place of the holder-less one?

brandonl2000

i hate the kind that goes under the console becuz i cannot lift my emergency break (like i do anyways...but if i need to) and i want one like this. http://www.jeepforum.com/gallery/showphoto.php?photo=38126&size=big&cat==
is this the one u were talking about going under the shifter bezel?? if so, where can i get this one? i love it.

UserID6095

I have that one. Seems to work ok. The holes are kinda small, but fits most drinks ok.

brandonl2000

rite. well see wen i have drinks its either fast food cups or my coffee mugs which my coffee mugs work fine like between my legs or watever. and i have cupholders that attach at the bottom of the window seal but i feel so trashy when i have my friends pullin cupholders out the floorboard to put in their window-seal.
soooo..where can i get this kind that goes on the gear shaft like this one??

cherokee083

They have the one that goes next to the shift bezel on lambertauto.com. I had one before and if you don't superglue it in then if you put a large dunkin iced coffee in it, the cupholder falls off

brandonl2000

super glue it?? how does it attach?

Howler_GT

I HAD the "smash-it-with-the-ebrake" cupholder.

I found on eBay the sidemount.
Drilled and countersunk 2 black trim screws in it and it works awesome.

Mrs Howler has BOTH.

I told her I do not care for "Style A" and that "Style B" would work better.
She said she wanted to try both of them out and she would let me know which she likes better.

That was over a year ago.

cherokee083

It hooks into the top two slots on the passenger side and the brace hooks into the lower slot

brandonl2000

and how exactly do you go about drilling and countersinking it or watever??
i wanna do it myself but i want it to look great like that does.