In order to get the bezel on the dash off do you have to take the steering column cover off? If you do is it just as simple as unscrewing it?

 

Pull the screws and pop it off.

The column cover doesn't have to move.

 

I didn't read all this crap but i think these work for yours.

http://www.ehow.com/how_7676274_disa...dashboard.html

 

Thanks LowRange. My '92 was a piece of cake but it's hard getting the bezel around the column cover with the airbag and I didn't want to break it.

 

Ah, I forgot the 96 has that huge column cover. It may be easier to take it off. I've never removed one like that. I remove the one off my 98 easily without removing the column cover.

 

Ugh. I hate the dash bezel. I couldnt figure out how to remove the column cover so i just yanked the dash bezel. I got lucky and didnt break it. Probably not the route you wanna go though cause it is risky

 

================================================== ====

There is only 2 torx headed screws holding the steering wheel cover on. It's rather small , I can't remember the exact size. I pulled mine off several times and it makes it a LOT easier if you remove the cover.

just my .02

 

Thanks! I'ss see if I can find a torx screwdriver for that then

 

Just pulled mine off and its a T15

 

Thanks Cobra. That makes my life easier.