85 XJ 2Dr Door Hinge question
#1
Senior Member
Thread Starter
Join Date: Apr 2013
Location: Dawson Springs, KY
Posts: 780
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1985
Model: Cherokee
Engine: 2.5L
85 XJ 2Dr Door Hinge question
My drivers side door has begun to sag to where sometimes I have to lift it a little to get it to close and latch correctly. I have been looking at it and I don't think it has replaceable pins, is that correct?
Do I need to get the complete hinge for this model?
Do I need to get the complete hinge for this model?
#3
Senior Member
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
I had that problem, but not as bad as that. I shimmed the bottom hinge a bit, on the door, to raise the front. which seems to work OK. Welding a new one on, with the wiring to the door etc could be a real fun job, like supporting the door when it's off, to replace the hinge....Sure is a lousy design...
#4
Senior Member
Thread Starter
Join Date: Apr 2013
Location: Dawson Springs, KY
Posts: 780
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1985
Model: Cherokee
Engine: 2.5L
Thanks. I was pretty sure the older ones couldn't be replaced that easy. I guess at the time they didn't plan on them needing to last 30+ years
Thread
Thread Starter
Forum
Replies
Last Post
tazunemono
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-09-2014 06:30 PM
KD3NE
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-08-2013 06:57 PM
grizbomb
Modified XJ Cherokee Tech
0
05-07-2012 09:39 PM
goneboating06
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
12-04-2011 10:47 PM
93,2door,xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-02-2010 10:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)