jretzky

Just thought I'd start a new thread on headliners.

My vehicle is a 89 Cherokee Laredo.

Heard several people out there are having the same problem with the headliner.

Mine has a few small tears in it and I think it can be saved (?).

It appears that the whole headliner is not attached to the roof in the car.

It use to hang down over my head, but I put a safety pin in right over the drivers seat.

Wonder if anyone ever figured out how to save the old headliner and reattach it to the roof inside the car?

Then again, I wonder what is under the head liner and if I tore the whole thing off, if it would look ok?

Anyone ever tackle this problem?

I feel like I have this tarp hanging over my head.

Thanks!~jretzky

bubbarules1958

Just put a new one in. Super easy. Youtube it.

bubbarules1958

Easy to remove and instal. Just make sure you use good glue. I use the 3m spray adhesive.

OxfordCherokee2

This...... Is a spectacular choice for new fabric.

bubbarules1958

Any good fabric shop should have it.

jretzky

So is there something underneath the headliner that can be taken out?

I was wondering how to glue it.

It appears from your picture that there is a some type of hard board that the liner is glued to and then the whole thing is installed into the roof (?).

Thanks!~jretzky
PS. It looks like any material can be glued on.
I have used 3M adhesive and your right it's good.

bubbarules1958

Yeah cardboard like thing. Just youtube headliner. They will show you step by step how to do it. Several different movies.

SHELBYGT NSM

Hardest thing about doing headliners are keeping a good steady pace, dont rush it,

pdowty68

I took my entire headliner board out, ripped off the fabric, sanded off the excess glue and foam with steel wool, the green scouring pads (greenie weenies) and sandpaper, then some paint thinner to clean it up good. Then I bedlined it, it's on a 96 and it looks great! Or you could paint it with anything you want, just don't skimp on the prep work. It comes out nice. The picture is of my interior after major rust repair I did myself, I don't have any pics of the headliner though, but the bedliner looks nice on the headliner.

SuperRA

I redid mines with actual headliner material.


Just be sure to use the 3M adhesive meant for headliners.
This is the one I used.

There are a few of them that work, here's another one that I used to bond some bubble insulation to the roof before the headliner.

Just be sure to read the label, ones that definitely don't work actually say "Not for automotive headliner use" or something like that.

SHELBYGT NSM

SHELBYGT NSM

That makes me mad that i didn't think of that, thats cool as hell

bubbarules1958

I wanted ninja turtles but they were sold out.

SHELBYGT NSM

Just want to say good job on thinking outside the box,

bubbarules1958

Thank you.