So I've been getting this thing in shape and up to par to get inspected to be street legal. Having an issue with my windshield wipers though. It will only go one speed. No high, low, or intermittent. I turn it all the way to low or high, but still only goes low. Any idea what might be the issue?

 

Pull wiper delay and plug the connectors together see if all speeds work.

 

Yes.

It's that squarish block module held on by velcro under the dash by your left knee.

 

I will do that as soon as I get home. What is that unit for if it will work without it?

 

Ok, I tried it. Same thing. What do yall think now?

 

This?

 

yes sir. pulled it. plugged the 2 connections that were on it, together. still just one speed. i believe you would call it low. stays low on the high or low setting

 

Are the wipers jerky acting also?

 

no sir. wish there was a way to send a video, or is there?

 

they just won't turn on till i hit the low constant, then it is the same on high. will stop where its at as soon as i get it back to intermittent settings. then of course goes back back to the base when i turn off.

 

The actual wiper switch is in the column. Go look at the plugs and wiring under/around the column.

 

let me see what i can do

 

well, when i have more time later on, i will have to figure out how to remove the cover on the steering column. i saw the wires coming out of the bottom though. i lucked out and got half of last night, and tonight off of work. have to go back tomorrow night for another week and half. then i will have a week to work on all the problems i have

 

Test plug at motor to see if you getting current at it when wipers are on high. If yes replace motor if not check switch plug under dash. Ill bet its motor dont really hear renix wiper switch in coloumn going out.

 

looks like dark blues high at plug........