Some OEM XJ Steering Components..
#1
Seasoned Member
Thread Starter
Join Date: Sep 2010
Location: CT
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Some OEM XJ Steering Components..
Got some used OEM steering links...
pictured is 2 drag links, 1 OEM XJ tie rod, & alternator to PDC fusible link...
drag link ends have play in them, broken dust boots, adjusting collars, & not bent... also, 1 has stabilizer w/mounting stem, thats solidly rusted on... $20 each (still have to figure out how to ship, but might be $15-20 flate rate)
XJ tie rod... could use new ends... but straight as an arrow... $30 + shipping
fusible link... still in working condition... removed when I went to 136A alt... $10
lastly, BRAND NEW OEM XJ track bar w/new crown nut... no cotter pin or grease screw... $40 + shipping
pictured is 2 drag links, 1 OEM XJ tie rod, & alternator to PDC fusible link...
drag link ends have play in them, broken dust boots, adjusting collars, & not bent... also, 1 has stabilizer w/mounting stem, thats solidly rusted on... $20 each (still have to figure out how to ship, but might be $15-20 flate rate)
XJ tie rod... could use new ends... but straight as an arrow... $30 + shipping
fusible link... still in working condition... removed when I went to 136A alt... $10
lastly, BRAND NEW OEM XJ track bar w/new crown nut... no cotter pin or grease screw... $40 + shipping
Last edited by xj^REMY; 12-18-2011 at 12:53 PM.
#4
Seasoned Member
Thread Starter
Join Date: Sep 2010
Location: CT
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
just a little surface rust ... tie rod's straight (trail spare)... the fusible link's still good, could save someone's day that still has stock 90A alternator
drag links arent bent (besides designed bends)... again these could be used as a trail spare... im looking into rebuilding the knuckle ends... emailed parts mike steering for info on that, but my search is pointing to no (i don't understand why it's non-rebuildable)... & the pitman arm end would just need a new tie rod end...
figured its worth a shot to offer it up... feels wasteful to just throw away
drag links arent bent (besides designed bends)... again these could be used as a trail spare... im looking into rebuilding the knuckle ends... emailed parts mike steering for info on that, but my search is pointing to no (i don't understand why it's non-rebuildable)... & the pitman arm end would just need a new tie rod end...
figured its worth a shot to offer it up... feels wasteful to just throw away
#5
Seasoned Member
Thread Starter
Join Date: Sep 2010
Location: CT
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
mmsobyak
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-29-2015 06:46 AM
ddurgin91
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-24-2015 09:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)