30x10.5 R15 BFG all terrains on 15x7 American Racing Rims NJ
Thread Starter
Seasoned Member
Joined: Sep 2010
Posts: 473
Likes: 1
From: Brunswick County, NC
Year: 1994
Model: Cherokee
Engine: 4.0
I have a set of rims and tires I would like to get rid of since they are just sitting. The tires are actually30x9.5R15 and not 10.5 wide that was my mistake. They have the typical BFG dry rot but I used them for a few months before I got my lift and 33's. It fills up the fenderwell nice with no lift or about 2 inches of lift. About 50% or better tread on the tires.
250 bucks is what i am asking but i am open to offers or trades. pm me if you have any questions.
250 bucks is what i am asking but i am open to offers or trades. pm me if you have any questions.
Last edited by Demolition_x; Mar 21, 2011 at 07:49 PM.
Thread Starter
Seasoned Member
Joined: Sep 2010
Posts: 473
Likes: 1
From: Brunswick County, NC
Year: 1994
Model: Cherokee
Engine: 4.0
Trending Topics
Thread Starter
Seasoned Member
Joined: Sep 2010
Posts: 473
Likes: 1
From: Brunswick County, NC
Year: 1994
Model: Cherokee
Engine: 4.0
Thread Starter
Seasoned Member
Joined: Sep 2010
Posts: 473
Likes: 1
From: Brunswick County, NC
Year: 1994
Model: Cherokee
Engine: 4.0
When it stops raining I will take pictures of all the wheels and the tread. One is missing a center cap another the center cap is a little messed up.
Thread Starter
Seasoned Member
Joined: Sep 2010
Posts: 473
Likes: 1
From: Brunswick County, NC
Year: 1994
Model: Cherokee
Engine: 4.0
Here are pictures of them on my jeep.
The rear tire is tucking a little bit but that was because the passenger front tire was up on a hill.
I had zero problems with rubbing with this set up in stock form.
And a correction I think they are 9.5 wide not 10.5
The rear tire is tucking a little bit but that was because the passenger front tire was up on a hill.
I had zero problems with rubbing with this set up in stock form.
And a correction I think they are 9.5 wide not 10.5
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



