Jeep Cherokee Forum
Coated the front end with Cosmoline Rust-Veto 342
Coated the front end with Cosmoline Rust-Veto 342
0 2022/01/22 15:12:01
Close to firing
Close to firing
0 2021/11/11 13:23:41
Also I stalled four seasons adapters to convert to r134a
Also I stalled four seasons adapters to convert to r134a
0 2021/11/11 13:23:09
0 2021/11/11 13:22:16
AC line runs through but should still be easy to unhook the battery terminal
AC line runs through but should still be easy to unhook the battery terminal
0 2021/11/11 13:21:43
It's a tight fit, especially with 2ga wire.
It's a tight fit, especially with 2ga wire.
0 2021/11/11 13:20:56
0 2021/11/11 13:20:34
0 2021/11/11 13:18:22
Fabricated a bracket to hold the 200 amp circuit breaker for the alternator power output and the 150 amp stereo supply. Mounts under the reciever dryer bracket and then has a support that extends to the power distribution mount.
Fabricated a bracket to hold the 200 amp circuit breaker for the alternator power output and the 150 amp stereo supply. Mounts under the reciever dryer bracket and then has a support that extends to the power distribution mount.
0 2021/11/11 13:17:43
0 2021/09/29 04:32:32
0 2021/09/29 04:32:11
Felt pretty good to get the engine in.
Felt pretty good to get the engine in.
0 2021/09/29 04:31:36
0 2021/09/29 04:31:06
0 2021/09/29 04:30:38
0 2021/09/29 04:30:01
0 2021/09/03 00:12:10
New A/C compressor
New A/C compressor
0 2021/09/03 00:11:11
I had gotten the intake vapor blasted but it just didn't clean up as well as I would of liked so I ended up painting it.
I had gotten the intake vapor blasted but it just didn't clean up as well as I would of liked so I ended up painting it.
0 2021/09/03 00:10:16
I cut down the power steering support as the end piece stops you from being able to pull the valve cover with it on.
I cut down the power steering support as the end piece stops you from being able to pull the valve cover with it on.
0 2021/09/03 00:07:55
0 2021/09/03 00:07:23
New water pump and some pulleys.
New water pump and some pulleys.
0 2021/09/03 00:05:00
0 2021/09/03 00:02:49
0 2021/09/03 00:02:18
Modified the brackets and installed a 160 amp Durango alternator. Got to have a big stereo and the 90 amp wasn't going to cut it.
Modified the brackets and installed a 160 amp Durango alternator. Got to have a big stereo and the 90 amp wasn't going to cut it.
0 2021/09/03 00:00:10
Installed new brass expansion plugs and sandblasted the oil pan and other engine covers. Painted the silver ones with Dupli-color cast aluminum engine enamel.
Installed new brass expansion plugs and sandblasted the oil pan and other engine covers. Painted the silver ones with Dupli-color cast aluminum engine enamel.
0 2021/09/01 15:26:37
Changed out the rear main seal. Get the Fel-pro on with the plastic install tool. I torn one the Mahle one I originally tried cause it didn't have it. Mains looked good.
Changed out the rear main seal. Get the Fel-pro on with the plastic install tool. I torn one the Mahle one I originally tried cause it didn't have it. Mains looked good.
0 2021/09/01 15:24:56
Head on. Was rushing and forgot to reinstall the lifters but thankfully I could turn the engine on the stand and install them from below
Head on. Was rushing and forgot to reinstall the lifters but thankfully I could turn the engine on the stand and install them from below
0 2021/09/01 15:23:32
New timing set and head gasket
New timing set and head gasket
0 2021/09/01 15:22:56
Lapped the valves and changed the valve seals
Lapped the valves and changed the valve seals
0 2021/09/01 15:22:21
Painted with Dupli-color engine enamel
Painted with Dupli-color engine enamel
0 2021/09/01 15:21:58
0 2021/09/01 15:21:04
0 2021/09/01 15:20:42
0 2021/09/01 15:20:19
Lapped the valves, and changed the seals.
Lapped the valves, and changed the seals.
0 2021/09/01 15:19:29
Painted with Dupli-color engine enamel
Painted with Dupli-color engine enamel
0 2021/09/01 15:18:52
0 2021/09/01 15:16:57
0 2021/09/01 15:16:32
0 2021/09/01 15:15:53
0 2021/09/01 15:15:28
Painted with Dupli-color engine enamel
Painted with Dupli-color engine enamel
0 2021/09/01 15:14:29