Jeep Cherokee Forum
0 2021/12/28 11:49:34
0 2021/12/28 12:23:56
0 2021/12/28 12:24:23
I bought a 6 liter ultrasonic cleaner from amazon. The brake assembly fits well but will need flipped to get 100% coverage. Also bought some white vinegar and a gallon of WD-40.
I bought a 6 liter ultrasonic cleaner from amazon. The brake assembly fits well but will need flipped to get 100% coverage. Also bought some white vinegar and a gallon of WD-40.
0 2022/01/08 11:00:09
Here is a good picture of how it looked before. Hopefully I can clean up all of the rust.
Here is a good picture of how it looked before. Hopefully I can clean up all of the rust.
0 2022/01/08 11:01:46
​​​​​​​I took apart what was able to be taken apart. I did not want to cut the rivets or undo anything that was permanent. It the assembly needs adjusted or worked, I'll cross that bridge after its cleaned.
​​​​​​​I took apart what was able to be taken apart. I did not want to cut the rivets or undo anything that was permanent. It the assembly needs adjusted or worked, I'll cross that bridge after its cleaned.
0 2022/01/08 11:02:34
0 2022/01/08 11:03:28
0 2022/01/08 15:33:23
Front.
Front.
0 2022/01/08 19:34:13
Back.
Back.
0 2022/01/08 19:34:20
Spare parts.
Spare parts.
0 2022/01/08 19:34:26
0 2022/01/08 19:34:32
0 2022/01/28 17:14:47
0 2022/01/28 17:15:09
0 2022/01/28 17:15:22
0 2022/01/28 17:17:05
I ground it down flush for right now. I am going to manually file it down flat and a little further than factory to apply more pressure and make it stiffer.
I ground it down flush for right now. I am going to manually file it down flat and a little further than factory to apply more pressure and make it stiffer.
0 2022/01/30 09:36:24
This one was necessary to remove to separate the brackets.
This one was necessary to remove to separate the brackets.
0 2022/01/30 09:37:37
0 2022/01/30 11:36:16
Rivet head ground down to disassemble the bracket.
Rivet head ground down to disassemble the bracket.
0 2022/01/30 11:36:35
Smaller rivet. I only wanted to remove as little as possible. I didn't want to do this one, but it was necessary.
Smaller rivet. I only wanted to remove as little as possible. I didn't want to do this one, but it was necessary.
0 2022/01/30 11:37:23
0 2022/01/30 11:43:18
0 2022/01/30 11:43:26
0 2022/01/30 11:43:34
0 2022/01/30 11:43:44
0 2022/01/30 11:46:12
0 2022/01/30 11:52:45
0 2022/01/30 11:52:51
0 2022/01/30 11:55:17
-96 with a 96+ windshield washer reservoir
-96 with a 96+ windshield washer reservoir
0 2022/02/06 17:02:36
0 2022/02/06 17:04:45
0 2022/02/06 17:13:03
0 2022/02/06 17:23:06
I did not need many of the connections so when i removed it i just snipped them.
I did not need many of the connections so when i removed it i just snipped them.
0 2022/02/06 17:37:35
0 2022/02/06 17:39:16
0 2022/02/06 17:49:07
0 2022/02/06 17:51:57
I think this would be optimal. All of the electronics would be on the same side so it would be easier to wire, service, and better aesthetics. The downfall with this location is I will have reroute the coolant overflow bottle, reroute the cruise control vacuum,
I think this would be optimal. All of the electronics would be on the same side so it would be easier to wire, service, and better aesthetics. The downfall with this location is I will have reroute the coolant overflow bottle, reroute the cruise control vacuum,
0 2022/02/06 17:54:08
I will have to modify it to accept the yellow cap that I love so much. I will also have to delete the pumps and add the inlet hose connector, and overflow hose. This could prove challenging because I am a perfectionist, but that sounds like a problem for my future self.
I will have to modify it to accept the yellow cap that I love so much. I will also have to delete the pumps and add the inlet hose connector, and overflow hose. This could prove challenging because I am a perfectionist, but that sounds like a problem for my future self.
0 2022/02/06 18:10:39
0 2022/02/06 18:14:43