mini fuse terminal size?
#1
Senior Member
Thread Starter
Join Date: May 2015
Location: Louisville KY
Posts: 736
Likes: 0
Received 4 Likes
on
4 Posts
Year: 01
Model: Cherokee
mini fuse terminal size?
Like the title says, I can't find anything anywhere that tells me what size terminal connects to a standard mini fuse. I would just go to Radio Shack but all the ones near me have closed. Trying to order some parts online. all the relays tell you the terminal size but nothing on mini fuses.
thanks
thanks
#4
CF Veteran
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes
on
767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
No, the prongs on the fuses do not fit the standard push-on connectors properly.
An ATC (standard larger fuse) prong is 0.206" wide, so a 1/4" (.250) connector will work. I've used them. It's a sloppy fit, and only good for emergency use. They don't stay connected well.
The prong on the ATM (mini) fuses is .110" wide. You might get it to work with a 1/8" (.125") push on connector, but make sure you use the kind that has insulation over the entire connector, or you are likely to have a short. Again, only for short term emergency use.
Better yet, just buy a connector that is made for the fuse.
http://www.wiringproducts.com/atm-mini-fuse-holders
An ATC (standard larger fuse) prong is 0.206" wide, so a 1/4" (.250) connector will work. I've used them. It's a sloppy fit, and only good for emergency use. They don't stay connected well.
The prong on the ATM (mini) fuses is .110" wide. You might get it to work with a 1/8" (.125") push on connector, but make sure you use the kind that has insulation over the entire connector, or you are likely to have a short. Again, only for short term emergency use.
Better yet, just buy a connector that is made for the fuse.
http://www.wiringproducts.com/atm-mini-fuse-holders
#5
Senior Member
Thread Starter
Join Date: May 2015
Location: Louisville KY
Posts: 736
Likes: 0
Received 4 Likes
on
4 Posts
Year: 01
Model: Cherokee
No, the prongs on the fuses do not fit the standard push-on connectors properly.
An ATC (standard larger fuse) prong is 0.206" wide, so a 1/4" (.250) connector will work. I've used them. It's a sloppy fit, and only good for emergency use. They don't stay connected well.
The prong on the ATM (mini) fuses is .110" wide. You might get it to work with a 1/8" (.125") push on connector, but make sure you use the kind that has insulation over the entire connector, or you are likely to have a short. Again, only for short term emergency use.
Better yet, just buy a connector that is made for the fuse.
http://www.wiringproducts.com/atm-mini-fuse-holders
An ATC (standard larger fuse) prong is 0.206" wide, so a 1/4" (.250) connector will work. I've used them. It's a sloppy fit, and only good for emergency use. They don't stay connected well.
The prong on the ATM (mini) fuses is .110" wide. You might get it to work with a 1/8" (.125") push on connector, but make sure you use the kind that has insulation over the entire connector, or you are likely to have a short. Again, only for short term emergency use.
Better yet, just buy a connector that is made for the fuse.
http://www.wiringproducts.com/atm-mini-fuse-holders
Thread
Thread Starter
Forum
Replies
Last Post
darren509
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
15
04-10-2016 01:35 PM
ElMartillo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
04-02-2016 10:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)