jeep Comanche hitch
05-03-2015, 07:36 PM
#1
Seasoned Member
Thread Starter
Join Date: Feb 2011
Location: jackson nj
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
jeep Comanche hitch
Can someone please tell me if a universal hitch will fit on my 88 comanche? I've looked all over and can't find anything on this. I'm not trying to spend a ton of money on it. The trailer I will be towing is a light utility trailer.
05-04-2015, 09:06 AM
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,864
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Don't have a ball on your rear bumper?
05-04-2015, 04:28 PM
#4
CF Veteran
Join Date: Oct 2013
Location: Miami, fl
Posts: 7,378
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
It's one of the rarest pcs to find for a comanche and the quickest option to have one is to have one integrated into a bumper like the diy mj jcr offroad unit....
http://www.jcroffroad.com/product/DIY-MJ-R.html
http://www.jcroffroad.com/product/DIY-MJ-R.html
05-05-2015, 06:14 PM
#5
Member
Join Date: Feb 2014
Location: north of the Rio Grande, south of the Red, east of the Pecos, west of the Sabine
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Comanche
Engine: 4.0
I have a Reese 37042 universal installed on my '90 longbed. Took some drilling of an extra hole or two, as I recall, but it was a piece of cake.
05-07-2015, 11:01 PM
#7
Member
Join Date: Feb 2014
Location: north of the Rio Grande, south of the Red, east of the Pecos, west of the Sabine
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Comanche
Engine: 4.0
Trending Topics
05-08-2015, 07:22 PM
#9
Member
Join Date: Feb 2014
Location: north of the Rio Grande, south of the Red, east of the Pecos, west of the Sabine
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Comanche
Engine: 4.0
Well, that's very possible. I've been rear-ended twice.....only required bumper replacement on the 'manche, but totaled the cars that hit me, both times. So I've had a Fey bumper for as long as I can remember, long before I installed the hitch.
05-22-2015, 12:47 PM
#11
Junior Member
Join Date: Jan 2011
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
if you can weld and find somebody to laser or plasma some pieces out, you could build your own. i just had these lasered out at work last night. perfect match to my factory hitch,...except i had the bottom hole for the tube running across lowered 1/2" to better clear my bumper i made.
05-22-2015, 02:32 PM
#12
THE Admin
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
jeep Comanche hitch
if you can weld and find somebody to laser or plasma some pieces out, you could build your own. i just had these lasered out at work last night. perfect match to my factory hitch,...except i had the bottom hole for the tube running across lowered 1/2" to better clear my bumper i made.
05-22-2015, 05:12 PM
#13
Junior Member
Join Date: Jan 2011
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I could. But I run into the hassle of not having money to buy steel and then the lasers finding time to cut them for me and all that. I'd like to do it and help everybody out and even build the whole hitch for a few extra bucks but it might be a while. I am going to go price a sheet of 1/4" and 2.5" square tubing. And I could see what the lasers could do for me. I just don't wanna cut 20 sets of them and sit on them for years....
05-25-2015, 02:23 PM
#15
Member
Join Date: Feb 2015
Location: Three Rivers Mi
Posts: 283
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
It's one of the rarest pcs to find for a comanche and the quickest option to have one is to have one integrated into a bumper like the diy mj jcr offroad unit.... http://www.jcroffroad.com/product/DIY-MJ-R.html
