Lookin at an XJ
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
I have a 88 xj. I just had my colum rebiult 6 months ago for $300 bucks. It included a new ignistion ****ch, turn signal, bearings. Dont put it off. the longer you do the more it will cost. The bolts in the colum have come loose. If you rebiuld or have it rebiult put lock tight on the 4 bolts so they dont come loss again. vacum lines are cheap. I had the same problem. Napa Online for a vacum line kit. $50.00
Seasoned Member
Joined: Aug 2011
Posts: 362
Likes: 0
From: Minnesota
Year: 2001
Model: Cherokee
Engine: 4.0
You'll be fine. $900 for a running cherokee with a lift and 44 rear end (presumably) as a recreation vehicle sounds good. It will be a chance to bond with your local boneyard. Email Chrysler Customer assist for the spec sheet, they got back to me in about a day. http://www.chrysler.com/webselfservi...sler/index.jsp
Seasoned Member
Joined: Dec 2011
Posts: 307
Likes: 0
From: Texas
Year: 1997
Model: Cherokee
Engine: 4.0L Inline 6
The front D30 is not a bad axle, I wouldn't be too upset. Just maybe ask for some money back from the guy for faking you out, but ask in a nice way.
Thread Starter
Seasoned Member
Joined: Dec 2011
Posts: 319
Likes: 0
From: High Desert, CA
Year: 1987
Model: Cherokee
Engine: I6
Oh it gets worse! The guy had no pink BUT he gives me the transfer without title form that's notarized so I think I'm good. Nope. It's a two page doc and I only had the first page. Can't register it.
Thread Starter
Seasoned Member
Joined: Dec 2011
Posts: 319
Likes: 0
From: High Desert, CA
Year: 1987
Model: Cherokee
Engine: I6
Does he seem like he's going to work with you on it?
following this thread is heart wrenching...
I'm going to try another approach after the holiday weekend. Until then, Merry Christmas everybody. I'll have an update on this soap operah transaction next week.
Thread Starter
Seasoned Member
Joined: Dec 2011
Posts: 319
Likes: 0
From: High Desert, CA
Year: 1987
Model: Cherokee
Engine: I6
I have no other option. I don't have the vehicle here because I couldn't drive it without the registration. If it was in my driveway I would have pictures up immediately.
Sorry guys. I'm gonna have to wait to get the Jeep but once it's picked up I'll have pictures.
Sorry guys. I'm gonna have to wait to get the Jeep but once it's picked up I'll have pictures.
CF Veteran
Joined: Dec 2011
Posts: 3,237
Likes: 1
From: albany, new york
Year: 1988
Model: Cherokee
Engine: i6
CF Veteran
Joined: Dec 2011
Posts: 3,237
Likes: 1
From: albany, new york
Year: 1988
Model: Cherokee
Engine: i6
this dude ur dealing with seems kinda shifty, id take a bunch of pics, axles/trans/leaks,ect and post em here, but id pay a g for that... 44s or not but im in a ****ty market...but in my market, not title/no deal....
CF Veteran
Joined: Dec 2011
Posts: 3,237
Likes: 1
From: albany, new york
Year: 1988
Model: Cherokee
Engine: i6
, no offence low g....
