Billy Bee

96 xj engine into a 00. Ive swapped the 00 intake onto the 96. So no sensors there need to be swapped.

I know I need to swap the cam sensor in place of the dizzy. Found a post on setting the engine at TDC, using a toothpick, and putting the cam sensor in. Any other advice you think is helpful feel free to fill me in.

What other sensors do I need to swap to the 00 and where are they? Pictures are helpful as I do not know the names of all the sensors or locations. First time digging into an xj.

Billy Bee

Well after some research Ive found a few sensors that need to be swapped. Luckily they are mounted to the 00 intake manifold and the manifolds can be swapped with no modification. These sensors would include the IAC, TPS, IAT, and MAP sensor. Ive also read the TPS and IAT sensors between the 98 and 00 had the same connectors and do not need to be swapped? I haven't verified since I just swapped the 00 intake I have.

The cam sensor still needs to be swapped. If anyone knows of any other sensors or O2 sensor differences feel free to chime in!