Upper control arms not lining up after new lift
#1
Member
Thread Starter
Upper control arms not lining up after new lift
So I just installed my new 4.5" lift. My xj came with a 3" lift when I got it with the 4.5 parts in the trunk except for a track bar. I ordered a new track bar and installed it. Everything is lined up good. The track bar still needs some adjusting. Anyways the passenger side upper control arm will not line up with the mount on the axle. We tried using a large ratchet strap and got a bolt through one side of it. The other side's hole in the axle is about 3/4 inch too far forward and about 1/4 of a inch too high. Nothing looks bent or out of place. Keep in mine that these are the stock uppers and adjustable ones are coming in about a month. Do you guys think that the track bar could be throwing it off? I'm debating on just towing it to an allignment shop nearby that specializes in 4x4s and seeing if they can figure it out
#3
Member
Thread Starter
#4
Senior Member
Join Date: Dec 2017
Location: Calgary, AB
Posts: 622
Likes: 0
Received 9 Likes
on
7 Posts
Year: 1998
Model: Grand Cherokee (ZJ)
Engine: 5.2
Just had to deal with this crap myself.
Bolt in the lower and upper to the axle
Get a come-a-long or ratchet strap and pull the upper arm back using the axle mount and trans member.
This will let you get the upper in and bolts through.
Then with brute strength, leg power and a pry bar put the lower in at the body and put the bolt through.
If you block the wheels when doing this it helps keep the wheel centered. If your doing this on axle stands the disregard.
I did this with vehicle on ground with tires on and trackbar installed.
Bolt in the lower and upper to the axle
Get a come-a-long or ratchet strap and pull the upper arm back using the axle mount and trans member.
This will let you get the upper in and bolts through.
Then with brute strength, leg power and a pry bar put the lower in at the body and put the bolt through.
If you block the wheels when doing this it helps keep the wheel centered. If your doing this on axle stands the disregard.
I did this with vehicle on ground with tires on and trackbar installed.
Thread
Thread Starter
Forum
Replies
Last Post
mchulse
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-31-2011 03:02 PM
JerseyboyXJ
Modified XJ Cherokee Tech
28
07-30-2011 02:42 AM
Rbngrt98xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
07-24-2010 10:13 AM
INDIANA-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
03-17-2010 02:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)