Need Help! Lower Control arms no longer lining up.
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: Austin, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Need Help! Lower Control arms no longer lining up.
I thought I would take on my lower control arms this weekend as the bushings were in pretty bad shape. This was a mistake. I'm on day two and now realize why the arms weren't going back in. The entire front axle shifted 3 inches towards the driver side and now they won't line up (boy will I need an alignment after this botched job).
Does anyone have any ideas on how I can realign my front axle just enough to get the control arms back on so I can take it to an alignment shop? I've tried jacking the axle up just a little ways then moving the jack, no success. Any help would be greatly appreciated so I can get to work tomorrow.
Does anyone have any ideas on how I can realign my front axle just enough to get the control arms back on so I can take it to an alignment shop? I've tried jacking the axle up just a little ways then moving the jack, no success. Any help would be greatly appreciated so I can get to work tomorrow.
#3
Newbie
Thread Starter
Join Date: Mar 2010
Location: Austin, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Removed the track bar, used a couple racheting tiedown straps and it eventually aligned up. Thanks for the help.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)