U joints
Thread Starter
Newbie
Joined: Dec 2019
Posts: 9
Likes: 0
From: Puerto rico
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 6 in line
U joints
Well i think its about the time to replace them starting withe the driveshaft . they are factory from 99.....what u joints recommended for a everyday running jeep xj this one it not for off-roading xD
CF Veteran
Joined: Oct 2018
Posts: 1,096
Likes: 166
From: Hunt County Texas
Year: 1995
Model: Cherokee (XJ)
Engine: 4.0L
Spicer
And is there anything indicating they need to be replaced? I wouldn't bother unless you are getting signs of failure. The originals can last quite a long time. My front drive shaft and front axleshafts are still running original joints that are almost 25 years and 210,000 miles old.
And is there anything indicating they need to be replaced? I wouldn't bother unless you are getting signs of failure. The originals can last quite a long time. My front drive shaft and front axleshafts are still running original joints that are almost 25 years and 210,000 miles old.
Seasoned Member
Joined: Jan 2013
Posts: 353
Likes: 33
From: Ivory Coast, west Africa
Year: 1998
Model: Cherokee (XJ)
Engine: Toyota 2.4l diesel non-turbo (from a 1985 pickup) installed in 2009
If you need them, for a street Jeep you'll want Spicer 5-1310-X (non-greaseable).
One for the yoke end, which usually wears out first, and two for the double cardan
end if you need to replace that, too.
One for the yoke end, which usually wears out first, and two for the double cardan
end if you need to replace that, too.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Jun 29, 2015 10:03 AM
K5ADT
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Feb 12, 2013 11:19 AM
rtralabama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Jun 14, 2012 10:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
