Ok so I'm getting the last min parts for a d35-8,25 swap. Just realized the ubolts are different sizes do I need a different retainer plate you know th one ontop of the spring ? If so where can I get them ? Is the jy the only place

 

Pretty sure they are all the same. Just take care not to screw up the threads.

 

The u bolt kit at napa comes with new plates btw.

 

Ok well I can never make it to napa I got a kit at autozone it's a lift block kit but someone stole the blocks (like I care) they gave it to me 10% off so I took it. My brake line t should work from the d35 yes

 

get Dana forty four Ubolts, youll havta widen them slightly but there longer/bigger/stronger then stock D35- chrysler 8.25 Ubolts

 

No junk yards near by grab a set from a xj ?

 

you never should reuse Ubolts unless you have too.

 

Plates plates...lol...

 

Plates plates ...

 

good catch there buddy. my bad

 

There are close to my house but not work and I can't make it in time to get them. I'm doing my swap at work

 

Your d35 plate will work just fine with the 8.25. I just got done with the swap my self. The plate has oval shape holes in it for 2.75-3" u-bolts

 

Like I said in the second post, I'm pretty sure they are all the same. I've used the same set of plates on d35, c8.25, and now a d44.