Trying to figure lift size

Reply Subscribe

Thread Tools

Search this Thread

07-03-2016, 07:01 PM

worleyburd

Seasoned Member

Thread Starter

Join Date: Aug 2012

Location: Amarillo, Texas

Posts: 288

Likes: 0

Received 0 Likes on 0 Posts

Year: 1992

Model: Cherokee

Engine: 4.0I

Trying to figure lift size

So I did the measurements from the top of axle tunes to the unibody and I'm getting 3.25-3.5. The guy I bought it from a while back said it was a 4.5 RC lift. I know lifts sag after time and what not, but is there a way to tell if it's sagging or certain parts to look for that would be "specificish" to a 4.5 lift?

Just realized there was a thread I was supposed to put this in. Sorry guys.

Last edited by worleyburd; 07-03-2016 at 07:03 PM. Reason: Punctuation

Reply Like

07-03-2016, 07:03 PM

KaMoore

Member

Join Date: Feb 2016

Location: Tucson, AZ

Posts: 211

Likes: 0

Received 2 Likes on 2 Posts

Year: 1999

Model: Cherokee

Engine: 4.0L

Quote:

Originally Posted by worleyburd

So I did the measurements from the top of axle tunes to the unibody and I'm getting 3.25-3.5. The guy I bought it from a while back said it was a 4.5 RC lift. I know lifts sag after time and what not, but is there a way to tell if it's sagging or Cera in parts to look for that would be "specificish" to a 4.5 lift?

You are better to measure from the center of the wheel to the bottom of the fender flare to get lift heights. Stock was 17" from center of wheel to bottom of the stock fender flare.

Reply Like

01-25-2018, 11:44 AM

ccouvillion

Newbie

Join Date: Sep 2017

Location: Porltand Oregon

Posts: 18

Likes: 0

Received 0 Likes on 0 Posts

Year: 1998

Model: Cherokee (XJ)

Engine: 4.0

Quote:

Originally Posted by KaMoore

You are better to measure from the center of the wheel to the bottom of the fender flare to get lift heights. Stock was 17" from center of wheel to bottom of the stock fender flare.

My 1998 has Bushwacker 5” cut out flares. Where would I measure to on them to determine my lift size?

Thanks