I recently installed a 2" lift kit on my 1991 Jeep Cherokee Laredo. The spacers in the coil springs on the front work fine, but the shackles in the back caused the leaf springs to sag and go flat. Could I use a full length add-a-leaf to fix this? I know the drawback to AAL is that they don't last very long and the original problem returns. I didn't know if it would be any different since my springs didn't sag before I put on the new shackles.
Any advice would be great!
Thanks!

 

I like complete leaf packs with the correct lift.

 

Do it right the first time and buy full leaf packs.

 

If you don't do it correctly now your going to keep spending money on it over and over a complete 3" full leaf/coil/shock/hardware pkg. With all NA made leafs and coils can be bought from Rustys off Road for $438 I think is the cost. This is a quality entry level kit I have had my leafs and coils on now for almost 4 yrs. now no sagging. In fact still using them in a 4 1/2" lift without problems.

 

Thanks for the help!