transfer case info needed
Thread Starter
CF Veteran
Joined: Aug 2009
Posts: 5,676
Likes: 301
From: WV
Year: '96
Model: Cherokee
transfer case info needed
I was given an AW4 and 231 t/c out of a '92 Comanche and was wondering if the t/c would be a direct swap into my AW4/231 equipped '96 XJ. I'd be replacing the rear output shaft with a sye one.
Last edited by EZEARL; Aug 6, 2021 at 04:33 PM.
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
Should be a go, just make sure you have the right spline count on the input gear. You can swap them if needed while you have it apart.
Thread Starter
CF Veteran
Joined: Aug 2009
Posts: 5,676
Likes: 301
From: WV
Year: '96
Model: Cherokee
Seems the '96 XJ 231's could have 2 different input shafts. If it was a for sure match up between the two t/c's I'd install the sye in the Comanche t/c then swap it in to my XJ. I need to keep it on the road so I may end up doing an in the vehicle install.
Thread
Thread Starter
Forum
Replies
Last Post
jake100
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 25, 2016 10:11 AM
almostamos
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Mar 30, 2016 01:15 PM
garb.man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Jan 30, 2012 05:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)