XJPRO

will a Dana 20 work in my 94 XJ (without modifications)?

xjmarc

No. Most won't bolt up without an adapter and it's a passenger side drop so you'd need to rework your floor and swap the front axle, move your exhaust and get new drive shafts.

89cherokeelimited

Not worth it. I wouldn't do it

XJPRO

thanks guys

XJPRO

whats the best one to put in... i have the 249 now and i dont like the 4wd all the time

89cherokeelimited

NP 231.
Did it and haven't looked back. I had 242 and I hated it. I swapped it out for a 231 and it's great.

89cherokeelimited

The 231 will bolt right up and you will have all your same 4x4 indicator lights and stuff

XJPRO

thanks thats want i was thinkin too... only reason i asked about a dana 20 is could get it cheap

Hoooper

What could possibly make you hate the 242 and love the 231? It has all the same options just with one extra.

xjmarc

No diff inside to go out. I swapped one in my old ZJ and it was great for a year or so then the diff went out and low worked fine but 4 hi part and full time both worked when it wanted to. Most times I had only the rear wheels spinning. In the end 4 low wasn't even working. Pulled it apart and the chain was fine, diff was shot. It has a 231 in it now as far as I know, don't own it anymore.