I'm asking cause I just saw all the pipes in sections at my local store and since my wiring prevents me from routing through the cowl on the driver side, I have to run it to the pass side. Also in that setup, does the cone filter sit inside the cowl or somewhere in the pipe? I'm a newb to the air intakes so I'm trying to learn.

 

the wiring can easily be tucked underneath the brake mastercylinder if you undo the clips. if you use the factory air box, you plug the rectangular hole in the front of it and cut a 3in hole in the back. then you can use the regular lid and filter.

 

I have my OBA setup right there so that's why I can't run it on that side. My dang engine compartment is jammed full!

 

You can make a simialr one with Spectre parts in this order from intake to cowl:
8698,8698,8705,97611,9832,97611,8698,8708,8698,814 8

https://www.cherokeeforum.com/f67/my...1/#post1222641

 

What about the part number for the piece that bolts to the renix TB?

 

Snorkels on ebay for 115 fyi

 

Anyone on here ever got one or seen one in person?

 

Look at the end of this thread https://www.cherokeeforum.com/f11/xj-snorkel-117469/

 

I don't have the stock air box

 

I meant for the pictures and stuff for people who have them/picture of them haha

 

Those all the use the stock air box

 

I'm sure you could rig something else up

 

If I had the specter part that bolts to the renix TB, I could make nice clean cowl intake.

 

did this a long time ago, cheap filter my friend used on his camry and exhaust tube

don't forget to remove/plug this vac line renix guys

I really like that spectre intake plus its carb legal and I can tell the smog tech it eat it

 

Got an intake kind of like that made from pvc. Im looking for something to get the intake up higher