I'm about to install my entire suspension but want to use all new hardware. I need to find out the thread size and pitch if possible so I can have everything ready to roll.

Track bar bracket bolts at frame
Track bar bolts at diff
Control arm bolts at diff
Lower shock bolts
Leaf spring bushing bolts
Brake line banjo bolts

 

4- Upper control arms- M10x1.5x80mm (4 nuts required)
4- Lower Control arms- M14x2.0x120mm (4 nuts required)
6- Leaf springs/ shackles- M14x2.0x110mm (2 nuts required at shackle, frame side eye is welded nut)
4- Front sway bar at frame- M10x1.5x30mm
8- Shocks at bar pins- M8x1.25x35mm (with nuts, 4x lock washers if your rear bolts break and you have to go fishing)
1- Track bar bolt- M10x1.5x70mm (try to reuse factory nut)
2- Front sway bar end link stud at axle- M12x1.75 nuts
2- lower shock stud at rear axle- M12x1.75 nuts
2- front spring retainer- M8x1.25x25mm

 

You rock! Thanks man.

Any idea on those Banjo bolts at the caliper or should I go to dealer for those?

 

Disregard the banjo bolts

 

Does anyone happen to know the grade of bolt needed for the leaf spring eyes and the control arms?

 

If metric 10.9 if SAE 8

 

You sir are a life saver! Thank you.

 

I know this is an old thread, but this may help others when they stumble across this search. I am currently sourcing lower bolts for the front shocks. It is challenging to find metric grade 10.9 for the M8x1.25x35mm in most hardware stores. Most stores that stock this size have them in grade 8.8 which is similar to SAE grade 5.
As an alternative, if you want this in a grade 8 SAE, look for 5/16-24 x 1-1/2
5/16" and 8mm are virtually identical in diameter.

 

Hi I made an account just for this. I see that you are out of the ultimate package I'm going to be putting my lift on my cm here soon and was wondering if the shock package included the hardware for the rear suspension too ie the leaf spring bolts, rear shock bolts etc. I also have to replace my starring stabilizer. Is that in a different package?