Need some help/advice

I took out the 2 studs and 2 bolts out from each side... Piece of cake. I have a 2WD so is really the crossmember.

I cant seem to get it aligned for the life of me to put the bushings in with the bolt. It doesnt line up at all no matter what I do.

Ive tried to use the jack push/pull nothing.

What have you guys done to install the bushings and bolts? The cro

Heres the pics:

Why did you do or need a Transfercase drop, on a 2WD? You don't have a transfercase or stubby drive shaft to deal with. Are you lifted like 6" or something????????

Did u unbolt both sides at the same time? If u did thats ur problem, u should have done one side at a time

You need to pry the trans over to get it to line up. Chock the wheels and get it in neutral. Use a pry bar or jack between the body and trans or use a ratchet strap to pull the trans over.

Loosen the rany mount bolt in at the center so the member can move around. you will put the trans and motor mounts into even more of a bind, if you don't