Sye issues
#46
CF Veteran
Join Date: Oct 2012
Location: Orlando/Winter Garden
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: I6
#47
Beach Bum
Make sure the rear axle is shimmed correctly and the yoke is straight with the drive-shaft.
I just got a front driveshaft from e-bay $50 delivered. It bolted right up as a rear driveshaft.
A manual trans is more narrow and requires a longer shaft. Also the 231 is narrower and takes a longer shaft than the 242.
I just got a front driveshaft from e-bay $50 delivered. It bolted right up as a rear driveshaft.
A manual trans is more narrow and requires a longer shaft. Also the 231 is narrower and takes a longer shaft than the 242.
#49
Seasoned Member
Thread Starter
Join Date: Sep 2012
Location: Long Island, NY
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Mine is seeping where the yoke goes into the sye . Just be careful when pulling the yoke out and putting it back in. If it leaks a little no biggie. The seal is only like 4 bucks and you don't need to.open the sue back up to get to it. Just have to pull the driveshaft and the yoke off..do a seal puller and.pop the new seal in
#50
CF Veteran
Join Date: Oct 2012
Location: Orlando/Winter Garden
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: I6
yes, i am. there the same size bolts with the same thread. only difference is that it doesnt take a wrench, it takes allen key. i found it at ACE hardware store, all black, grade8 hardware. fits perfectly and ill be runnin them for a while. dont bother with advance or napa or any other shop. these are grade8 quality bolts that cost me .55 each. awesome deal
#51
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
yes, i am. there the same size bolts with the same thread. only difference is that it doesnt take a wrench, it takes allen key. i found it at ACE hardware store, all black, grade8 hardware. fits perfectly and ill be runnin them for a while. dont bother with advance or napa or any other shop. these are grade8 quality bolts that cost me .55 each. awesome deal
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
lil01cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-10-2015 05:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)