I have a 4.5 inch lift, with link disconnects. The nut that holds the upper link to the sway bar keeps coming loose, and I even lost a few. I have tried loctite, they still come loose eventually. What other options are there to keep these guys tight?

 

Is there enough room to double nut them ?

 

Double nuts hold mine together well:

Tighten one against the outher

 

Nylock nuts....................... Problem solved.

 

not really. Could get a second one on halfway.

 

gonna give these a try. Just can’t find why flange nuts with loctite won’t work.

 

Look at the image I posted, and you'll see that I used a thin nut on the bottom and placed the aircraft nut on the top of a Rubican Express sway bar link

 

i did. The ones in question on mine are not the ones on top, but on the back side I d what you’ve shown. Holding the ball joint tight.

 

I guess I’m kinda wondering why loctite isn’t working. Can it not withstand the vibration?

 

Yes, that bolt would have to be replaced with a longer one to get two nuts on it - fortunately mine have not come loose unlike the one on top which caused me to place two there - but I'll now know to keep an eye on mine