Just replaced my sagging 3" leaf pack with a 3.5" RE springs (which net me 4.5" btw) and as i take it for a test drive i realized that the steering wheel has offset (used to be dead center) by like 20*.

Strange as nothing on the front was being touch.

Any thoughts?
btw, front is still standing at 3.5".

 

You need to check to make sure everything is lined up on your springs. Also make sure your rear axle is centered.

 

Everything is fine.
Drives fine too.

Don't understand how steering wheel can be affected when only REAR springs are being replaced.