Ok I need some help here. I have replace the u joints at the wheels and the wheel bearings calipers rotors and brakes. I'm still getting pull bad to the left and a horrible popping noise at any time I hit a bump. If I'm doing 30-40 mph and hit a bump just right my whole frontend just about bounces off the ground. I can't find the issue. Any ideas?

 

bounceing would be shocks as for the pull hows the alingment,popping could be shock or sway bar bushings

 

Popping could be broken shocks or balljoints.

 

I'm sure the alignment is out due to my off road driving habits and I know the camber and caster is out due to the tread ware. It also has a bad vibration unless I'm turning to the left it just stops vibrating. I will check the shocks and bushings. Could it have anything to do with my sway bar? I have removable sway bar links and a 4 inch rc suspension lift.

 

Have your front end aligned and go from there
.

 

the pull will not have any thing to do with the sway bar that you alinghment most likley or bad wheel bearing

 

x2 it can be done at home

 

http://4x4xplor.com/alignment.html

 

How can it be done at home?

 

get out a tape measure

 

^x2 We did the Blazer in my signature at home. Make sure you check your upper and lower ball joints also.

 

Thanks for the help guys. Turns out I need l/u ball joints sway bar bushings and a trac bar.