i bought a 94 cherokee xj he reemed out the steering knuckle to fit the 1 ton jcr steering upgrade. my problem is i dont have all the extra money to rebuy the steering and the new knuckles are like 300 a piece is there any way that i can substitute something for them? or any ideas without spending a massive amout of money on this?

 

I can send you a set of knuckles for $75 shipped off my 98 part out. Best thing to do would be to buy the tie rod ends and keep that set up because them you'd have to go back to stock set up.

Or look and see if you can find a part number for the tie rod ends.

 

will the jcr ends match up to the stock steering on them or no?

 

No that's why they're reamed.

 

http://www.seriousoffroadproducts.co...ath=1231_2092&

 

JCR uses stock Chevy one ton tie rod ends that can be had at any parts store.

 

i ment the screwing into the tie rod arm...

 

Yes, but the pass.side tre must be reamed to accept the draglink tre.