Hi all. I have a 91 with an older Renix in it. My EGR has mostly been deleted. I am looking to cap off tube that goes from the intake/ exhaust manifold. I have removed the bolts holding it in, but the pipe itself seems to not want to come out. Does anyone have tips on how to remove that pipe? Also, I have one cap that came with my exhaust manifold, I’ll need a second for the intake side. I went to my local hardware store and couldn’t seem to find a match. Anyone know what size they are for threading into the existing holes?

Appreciate it!

 

I've pretty much gutted everything egr on my remix will have to get home and see if I removed what your talking about. Will post later

 

I’d appreciate it. It’s the metal pipe going from the intake/ exhaust manifold.

 

i recently deleted the EGR when i put an HO exhaust manifold on. I bought the block off plate off ebay to block, the plug you need for the intake is Dorman #090-061.

 

Awesome thank you! Do you have a renix? If so which plate did you buy? Did you just cut the pipe between the two and break it out?

 

I have an '88 (yes renix). I bought this plate here and I was able to get the pipe fitting off the intake manifold and throw away the original exhaust manifold with the egr pipe on it.