Ok Ive got my new RC 4.5" Xseries lift in. First off what kind/type of grease do I use on the joints? Second, how do I know how or where to adj the control arms to? The instructions give measurements for the track bar but nothing on Control arms.

 

Most basic brand and rating of grease in a tube will work.

 

Thanks

 

I assume thats center to center on bolt holes?

 

Keep in mind this is a starting point. At 4.5" lift and adjusting the lower arms to 16.5 and stock uppers I had 0 castor and driveline vibes.

 

Ok kit came with adj upper and lower control arms. Start with lowers at 16.5 and measure stockers(uppers) and go from there?

 

I could have bought adjustable uppers and corrected my pinion angle but I had tight funds then. It took 1/2" to get my pinion angle semi decent. 16" lowers and stock uppers is what I got now. 16 1/4 is what RC gives you for a length on their fixed lower arms at 4.5". Trial and error

 

thanks