Cgbxj

so I bought a rc 3in lift aal series 2 (lca) and I was wondering if the n2.0 shocks that came with it are the same ones they use for their bigger kits. If so what size. I am asking because I would like to put a 2in bb on top of my 3in and was wondering if I could use the same shocks. Thanks

Bluebyu

I think they are the same ones that come in the 4.5" kit. After that you need new shocks

Keaton

They wouldnt use the same length shock for both 3" and 4.5" kits. But the best way to tell would be to just email them and ask for lengths.

bheath

Friend has the 3" kit shocks and they measured ~15" collapsed. My 4.5" kit shocks measure ~16.5" collapsed.

Juan4you

When I bought the 4.5" kit I asked if they were the same as the 6", they said yes...not sure of the 3"though.

bheath

My shocks said they were good from 4.5"-6". The 3" shocks are different.

howie-14

if you run longer bump stops you should be ok run those shocks and get your bump stops where u want them then buy new shocks that way you dont blow out a new set

bheath

You want to explain? Because ^^^ that ^^^ doesn't make any sense.

howie-14

i have the same setup and i built longer bumpstops so i dont max out the shocks that came with my 3" kit and when i get my new shocks the bumpstops will help keep them from maxing out and keep from rubbing the fenders. sry that is what i should have said in the first place