Powertrax no slip locker
Thread Starter
Newbie
Joined: Mar 2016
Posts: 7
Likes: 0
From: Ventura Ca.
Year: 1995
Model: Cherokee
Engine: 4.0
Powertrax no slip locker
I'm not sure how this works but it seems like the present to start side stays in the locking position in the driver side is the one that is disengaging anyone tell me if this is how this is supposed to work frustrated and tired
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Try this again after some rest.
CF Veteran
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
the inside tire drives and the outside tire unlocks around turns. Maybe every time you've checked it you just got out of a right turn. You installed it without thrust washers and checked the center clearance with the check block right?
Thread Starter
Newbie
Joined: Mar 2016
Posts: 7
Likes: 0
From: Ventura Ca.
Year: 1995
Model: Cherokee
Engine: 4.0
Yes the clearances have been checked and are correct and the thrust washers are not reinstalled I will check it again after work thanks for you input
Thread
Thread Starter
Forum
Replies
Last Post
phishsihp
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Mar 31, 2016 11:14 PM
itsBenton
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Mar 21, 2016 11:47 AM
jeephume
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Mar 12, 2016 10:47 PM
project_financial_mistake
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Mar 12, 2016 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)