Pitman arm
#5
Member
Thread Starter
Join Date: Sep 2012
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I just installed a rc 4.5 x series kit, the adjustable track bar in the kit is junk and the or track bar bracket on the frame is flexing. This is causing death wobble. After talking with rc we determined the best fix for this is, to use the heym joint end track bar with a drop bracket and a drop pitman arm. I was also planning on going to 6.5 long arm in the front down the road.
#6
The only time you need to install a DPA is if you drop the trackbar as well.
The trackbar and drag link should be as close to parallel as possible.
Been covered here many, many, many times.
The trackbar and drag link should be as close to parallel as possible.
Been covered here many, many, many times.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)