Part-Time Dash Light Fix for CAD Delete
#1
Seasoned Member
Thread Starter
Part-Time Dash Light Fix for CAD Delete
Wonder if any cf parishioners have completed the CAD delete mod, including swapping out the vacuum switch on the t-case (NP231 specifically) for an electrical switch so that the 4wd dash lights will work.
Here is a description of the switch swap https://budgetgarage.net/2017/10/21/cad-delete3/
Here is a video of the executioner testing the output from the switch on the t-case.
I swapped the CAD polluted Dana 30 on my 1991 XJ for a 96' high pinion Dana 30. Wondering if this will work on a t-case in a 91' XJ?
Here is a description of the switch swap https://budgetgarage.net/2017/10/21/cad-delete3/
Here is a video of the executioner testing the output from the switch on the t-case.
I swapped the CAD polluted Dana 30 on my 1991 XJ for a 96' high pinion Dana 30. Wondering if this will work on a t-case in a 91' XJ?
Last edited by Rlmx; 01-13-2019 at 04:10 AM.
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Deleted many CADs, but never worried about the light since the lever position indicates engagement.
You can only imagine what it was like in the olden days......2 block ***** with no writing on them !!!!!!!
You can only imagine what it was like in the olden days......2 block ***** with no writing on them !!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
93beater
Modified XJ Cherokee Tech
8
03-09-2017 05:51 AM
94CountryClub
Cherokee Chat
2
01-13-2016 05:46 AM
Jakers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
07-29-2013 05:31 PM
aonejeeparmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
11-26-2010 05:44 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)