No spark, blowing the eng cntrl 2 fuse
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: fishers, in
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
No spark, blowing the eng cntrl 2 fuse
Ok I put a new crank sensor, coil, and pick up under the rotor. And come to find out it was blowing the eng cntrl fuse. If anyone has any ideas please post them thanks.
#2
I'm curious if you found the problem? Mine just started doin that today.
I replaced the fuse and drove it a block, blew it,replaced the fuse and drove it back. So I thought what the hell I'll try it again. Low and behold same exact thing happened.
I was thinkin maybe something to do with the braking system? Cause it only does it when I come up to the stop sign at the end of my block.
I replaced the fuse and drove it a block, blew it,replaced the fuse and drove it back. So I thought what the hell I'll try it again. Low and behold same exact thing happened.
I was thinkin maybe something to do with the braking system? Cause it only does it when I come up to the stop sign at the end of my block.
#3
Junior Member
Thread Starter
Join Date: Feb 2010
Location: fishers, in
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
mine was the o2 sensor wire touching the oil pan... you might want to check that, if its not that i really dont know where to tell you to look sorry...
#5
Yeah that's exactly what it was. I was on the trails the other day and somehow broke the bracket that holds the o2 wiring. And it fell down on the driveshaft. I got lucky and all that happened was it rubbed thru a wire. Thanks for the reply. I appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post
MoToad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-20-2015 11:50 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-02-2015 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)