motor and water..?
12-05-2012, 11:55 AM
#1
CF Veteran
Thread Starter
Join Date: Oct 2012
Location: Orlando/Winter Garden
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: I6
motor and water..?
gonna wash the jeep today and i really need to hose the motor cause theres a bunch of dirt and muck. so before i go spraying away, is there anywhere that i need to be careful about spraying with water?
thanks yall!
thanks yall!
12-05-2012, 12:25 PM
#3
Seasoned Member
Join Date: Jan 2012
Location: Valley Park, MO
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L Renix Freshly Rebuilt!!
Spray it while running. Avoid the cold air intake if you have one. Try to avoid any areas where there is a lot of electrical connectors or cover them with a plastic bag. Other then that you should be good!
12-05-2012, 01:36 PM
#4
Senior Member
Join Date: Jan 2012
Location: Tennessee
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Cover you distributor with a plastic bag... Just be careful of all the connectors like the OP said. If it runs funny after you spray it off, it probably just condensation in the dizzy and youll just need to drive it until it quits.
12-05-2012, 01:44 PM
#5
Junior Member
I just start mine up, avoid the intake and spray away.
Go pick up some B-52 from the parts store before you start. Get the engine warm, spray it on then hose it off.
It makes for a new looking engine bay.
Go pick up some B-52 from the parts store before you start. Get the engine warm, spray it on then hose it off.
It makes for a new looking engine bay.
Thread
Thread Starter
Forum
Replies
Last Post
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
05-21-2016 07:03 AM
Josh Meck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-27-2015 03:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
