Hey guys, I bought this 95 with a lift already installed, I’m assuming that’s an AAL in there. But as you can see the bottom leafs are off-center.

I’ve read that this isn’t super uncommon, but I’d like to fix it. Are the clamps in the right spots or should I spread them further apart? I’ve never really messed with leaf springs before so any tips would be greatly appreciated. Thanks!

 

Like you said, it isn't uncommon. I pound my lower leaf back into place occasionally with a mallet just to make my OCD happy, but nothing to be concerned about.

 

I'd get rid of the clamps. Id also drill out to 5/8" center pin.

Actually I did

 

It's not AAL. Buy some new straps/clamps and install then on the lower leafs after pounding them straight.

Something like Pro Comp 98-250b on Amazon.

 

u bolts look new so id assume they are possibly loose along with a loose center pin.

 

Thanks y’all, I’ll look into adding those other style of clamps. I also noticed that there’s a gap, is that supposed to be there so they have room to flex, or are they installed too close to the shackle?