I have eagle alloy 15/10 3.26 back spacing I think with 31s with a 2 in bb and all I had to trim was alittle bit of the plastic trim piece now no rubbing at all

 

looks good and exactly what I'm looking for!

 

The BS on a 15" wheel needs to be 3 3/4 -4" for an XJ to keep from rubbing on the suspension/fender wells! Buy anything else and you will have issues where the need for spacers etc. are needed none good.

But the correct wheel to begin with, you can buy nice steel wheels from Summit, Jeg's for a very reasonable price with free shipping. I bought the Cragar Soft Eights when they were buy 4 get one free and you have to have a spare the same size.

Both of those companies have house brands that look like the Cragar's and other copy's of them for less money than brand names. My son bought some from Jeg's the D-Window style looked nice to me, these start in the $60 range for that size.

 

Only thing I rubbed when on my stock wheels were my LCA at full lock, unless of course I had my tire fully stuffed(no sway bars)and It barely rubbed right about the spring, and to fix the LCA rubbing I adjusted my steering stops

 

Thanks guys. Probabluy gonna get something in the next 2 weeks or so.

 

31x10.5/15 Hercules all - track installed for $ 450, decent deal?

 

Not a bad price, now just depends on what wheel you ended up using as to what they hang up on or get cut by.

 

Stock rims.

 

 

Heres mine with 31''s and 2 inch lift

 

Did you cut your fenders? You look like you have way more room than me.

 

Those are cut

 

Thought so. I want to keep my cherokee body as original looking as possible

 

Once you go offroading and disconnect the sway bar, theyll end up popping the flairs off, happens to everyone that says they want to keep it original. You could always trim and mount the flairs higher

 

Probably. We'll see how it goes. Next Saturday I will be heading over to a 4x4 shop where I was offered to ramp and forklift for full flex to see where I'll rub.