jeepcherokee89

i ended up with 2 sets of jk shocks one set is stock and the other are aftermarket they say explorer on them, the stock ones are harder to compress they are the same length, wich one would be better to use
thanks

Metmknice

Probably stockers, you will need to run BPE or remove sleeve/install bar pin for the front.

jeepcherokee89

yea im not having good luck geting the bar pins out so i might be looking into the bpe's

Edit: i actually just found a site that says i can use the rear sway bar mounts as a BPE for the rear shocks so i will be trying that it looks like to use them for the front i will have to trim them up a little and drill a new hole but they should work