IRO Rock Link w/ metal cloak durometer bushings?
Thread Starter
Newbie
Joined: Jul 2021
Posts: 2
Likes: 0
From: Ocala, Fl
Year: 98
Model: Cherokee (XJ)
Engine: 4.6 Stroker
IRO Rock Link w/ metal cloak durometer bushings?
Has anybody used the metal cloak durometer bushings on the IRO Rock Link long arms? The arms are setup for shanks at 5 degrees while the metal cloak is just a straight shank. Will that 5 degree cause any problems? Has anybody gone this route before? Having difficulty finding a quality bushing for a daily driver with a 5 degree shank. Any feedback is appreciated. Thank you!
CF Veteran
Joined: Aug 2018
Posts: 1,905
Likes: 346
From: Idaho
Year: 89
Model: Cherokee (XJ)
Engine: Peddles
I think sfr makes and sells upper ends with a 5 or 10deg kick to them
https://www.stinkyfab.com/products/j...nk-clevis-ends
No idea if they will thread into your arms.
https://www.stinkyfab.com/products/j...nk-clevis-ends
No idea if they will thread into your arms.
Thread Starter
Newbie
Joined: Jul 2021
Posts: 2
Likes: 0
From: Ocala, Fl
Year: 98
Model: Cherokee (XJ)
Engine: 4.6 Stroker
I think sfr makes and sells upper ends with a 5 or 10deg kick to them
https://www.stinkyfab.com/products/j...nk-clevis-ends
No idea if they will thread into your arms.
https://www.stinkyfab.com/products/j...nk-clevis-ends
No idea if they will thread into your arms.
Thread
Thread Starter
Forum
Replies
Last Post
JerpCherooke
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
May 10, 2018 01:30 PM
Marks2000XJ
Modified XJ Cherokee Tech
13
Oct 20, 2011 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)