Humvee wheels and tires on xj
#16
Seasoned Member
Thread Starter
Join Date: May 2013
Location: North Atlantic - Delaware
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: Inline 6 4.0
You'd need full width axles out of at least a 1-ton truck just to fit those wheels. For those particular tires, you need the strength of those 1-ton axles just to push the weight of the tire reliably. By 1-ton, we're talking about F-350/3500 level. If you just want to run off-the-shelf 37s, you can do it stock with a lot of cutting, or you can lift it 14" and leave the body alone. Do me a favor, and do a lot more reading and research before you make any of these modifications. If you don't know what you're getting into, you can take extremely dangerous shortcuts without even realizing it.
#18
Member
Join Date: Nov 2014
Location: Manitoba, Canada
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
#20
Member
Join Date: Nov 2014
Location: Manitoba, Canada
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
#21
CF Veteran
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 14 Likes
on
14 Posts
Model: Cherokee
Xjmember its not just jeeps i have seen lift blocks in the front a 80s gm truck before.I seen a 70s caprice at a car show lifted for 26s,Well they welded scrap metal on top of the stock spindle to lift it.Stuff like that scares me its on the same roads im on.
#22
Member
Join Date: Nov 2014
Location: Manitoba, Canada
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Yeah those are hazards to, but if the Jeep that is poorly built is actually wheeled im sure its more dangerous than those that just drive on the roads. Im sure neither of those two you listed see the same amount of load on them as something that is being wheeled.
#24
CF Veteran
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 14 Likes
on
14 Posts
Model: Cherokee
The lift blocks in the front of the leaf spring truck i seen at a local off road park,And using them in the front will sheer off the u bolts in time.The spindles they welded scrap metal on looked like hell.The welds looked lie chewed gum and had random size pieces of metal just slapped all over the top of the spindle.Most who lift cars use truck lift spindles which bolt right on.
#25
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
Here are some "custom" front blocks. Guy was bragging about his lift. In the rear he cut the frame out of another truck and welded it to the existing frame with spacers so he didn't have to run bigger leaves. Truck was street drive and had 44s on it.
Thread
Thread Starter
Forum
Replies
Last Post
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-27-2020 09:24 AM
xjallseasons
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
05-22-2016 12:47 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)