HID conversion
#1
Member
Thread Starter
Join Date: May 2009
Location: Monroe, NC
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 L 242 High-Output I6
HID conversion
I got the head light conversion so I only have to put in the H4 bulb instead of the whole unit. Could I put in HIDs in replacement of regular bulbs just like any other car or truck?
#2
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
no you cannot. You need to have projector headlights. an H4 housing is different and you will blind drivers and lose the purpose of having HID lights as you will not have the proper light pattern.
Plus H4 will be plenty of light. first start by upgrading your wiring (they make plug and play kits)
Plus H4 will be plenty of light. first start by upgrading your wiring (they make plug and play kits)
#3
Member
Join Date: Jul 2010
Location: Maple Shade, New Jersey
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
The XJ has a sealed beam headlight; unless you want to drill a hole in the back, you would need to buy a new housing. If you were to install a H4 Xenon bulb (HID) then i would suggest replacing the housing with a projection lens housing. Preferably diamond cut. You could simply buy a non projector lens, although I am pretty sure that is illegal in every state as you would be shining the bright xenon into oncoming traffic. Also, if you want to pass inspection, you may want to think about getting bi-xenon HIDs. This will allow you to have both low and high beams, as the XJs use the same bulbs for both. Finally, I suggest getting a kit, otherwise without the ballasts you'll be blowing them expensive bulbs out the door.
<Here is a link to my build thread where I installed my HIDs>
<Here is a link to my build thread where I installed my HIDs>
#4
Newbie
Join Date: Nov 2011
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I just installed a hi/low hid kit in my xj from DDM tuning, and they work great except now the only way to turn the headlights off is to turn the key off after pushing in the headlight switch. Anyone else had this problem?
#5
Seasoned Member
Join Date: Aug 2011
Location: Florida
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Order a 9 dollar hid relay kit from ebay i guarantee************** your problem will be gone
#7
CF Veteran
Trending Topics
#9
Senior Member
Join Date: Dec 2009
Location: Elk River, Minnesota
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Hmm mine if you shut the key off then the headlights they will stay on for 60 seconds (?) maybe its longer or shorter but it is a design feature not a problem....If leave them on after the key is off and then you toggle the key on to off again do they shut off right away? (That is how they should work.)
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Aw4 Transmission 67xxx miles
JeepStephie99
Engines/Tranny/T-Case
14
11-19-2015 11:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)