Hack and tap slip yoke and a ZJ driveshaft
#1
Newbie
Thread Starter
Join Date: Oct 2012
Location: Virginia
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: i6 4.0
Hack and tap slip yoke and a ZJ driveshaft
If I use the hack and tap slip yoke and use my front driveshaft in the rear and grab a front driveshaft from a junket ZJ how well will that work? Gotta 99 xj Dana 30 front chrys 8.25 rear and the NP231 transfer case. Any opinions?
#3
Senior Member
Join Date: Jul 2010
Location: Long Island NY
Posts: 997
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
I installed my SYE today and tried to use a factory front shaft I got at the JY. I found out they had multiple sized shafts for the front looking at some charts. With 3.5" of lift the 28.6" shaft is maxes out. I need a 30.6" to give me room to add more lift. Heres the thread I made earlier. has some useful links.
https://www.cherokeeforum.com/f67/ne...eshaft-159373/
https://www.cherokeeforum.com/f67/ne...eshaft-159373/
#5
Senior Member
Join Date: Jul 2010
Location: Long Island NY
Posts: 997
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Not sure who your asking Kevin, but I read the stock XJ shaft worked but its short. I read up on it some more and it seems there are different lenghts available. I need about a 30.5" shaft either from an XJ or ZJ.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Raney120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
10-16-2015 11:27 AM
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 01:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)