any chance you can measure the new one for please. Thanks

 

Ight ill go outside right know

 

From current extension I measured from the center of the u-joints on the shaft, not including the CV I got 30 1/4inches extended and there is about 2 1/4inches of the slip exposed so the close lengthen is 28 closed

Roughly measuring on the vehicle from center of cv joint to axle joint it was 33.5in.

I think the measure ments are off but I pretty sure they replace the RE 1860-285 that was to long with this re 1860-275

http://www.4wheelparts.com/Drivetrai...60-275#active1

 

When i get time ill throw up a shot of what I have done since i got the new shorter drive shaft

 

Catchin a bit of air lols