EASY! pushbutton start on 2000 XJ
#1
CF Veteran
Thread Starter
Join Date: Oct 2011
Location: Warrenton MO
Posts: 1,467
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.7L I6
EASY! pushbutton start on 2000 XJ
My key broke off a long time ago and since my engine is out at the moment i figured id do this now.
Things you'll need:
16g wire
wire connectors.
switch connectors
crimps
one on off toggle switch
one pushbutton on/off monentary switch
2 coors lights
Get started!
open beer one.
take lower dash panels off. one plastic one metal.
3 screws in bottom of plastic and two at top of metal one
take lower steering plastic. 3 screws underneath.
theres a large connection to the left of the column. its white.
disconnect it and locate the YELLOW wire. this is the starter wire.
connect a wire from one side of the momentary pushbutton switch to the yellow wire.use proper connectors.
take the other side and wire it to the on/off toggle.
open beer two
Locate the RED wire. this is your 12v constant that brings power to your accessories. connect the end that comes from the harness to the center pole on the on/off toggle and the end that goes to the connector to the same pole the pushbutton connects to.
Drill your mounting holes. i picked the front dash section next to my guage cluster.
connect all wires.
Leave some extra in the Red wire that connects to center post on on/off toggle if you want to run a killswitch under the dash.
that should be it. you can leave your key in the run position.
__________________
Objects in mirror are stuck...
If you dont like my tractor stack, keep it to yourself...
2000 XJ 4.7L 6-7in lift on 33's
Things you'll need:
16g wire
wire connectors.
switch connectors
crimps
one on off toggle switch
one pushbutton on/off monentary switch
2 coors lights
Get started!
open beer one.
take lower dash panels off. one plastic one metal.
3 screws in bottom of plastic and two at top of metal one
take lower steering plastic. 3 screws underneath.
theres a large connection to the left of the column. its white.
disconnect it and locate the YELLOW wire. this is the starter wire.
connect a wire from one side of the momentary pushbutton switch to the yellow wire.use proper connectors.
take the other side and wire it to the on/off toggle.
open beer two
Locate the RED wire. this is your 12v constant that brings power to your accessories. connect the end that comes from the harness to the center pole on the on/off toggle and the end that goes to the connector to the same pole the pushbutton connects to.
Drill your mounting holes. i picked the front dash section next to my guage cluster.
connect all wires.
Leave some extra in the Red wire that connects to center post on on/off toggle if you want to run a killswitch under the dash.
that should be it. you can leave your key in the run position.
__________________
Objects in mirror are stuck...
If you dont like my tractor stack, keep it to yourself...
2000 XJ 4.7L 6-7in lift on 33's
Last edited by ol'DixieJeep; 10-26-2011 at 11:41 PM.
The following users liked this post:
6hwy6xj6 (12-31-2022)
#5
CF Veteran
Join Date: Aug 2010
Location: The Florida State University
Posts: 8,387
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
First, Dixie submitted this as a write-up and then just copy and pasted the text so we can get a little hint as to what was going to happen. It's all my fault lol
Dixie- this set-up works with the key correct? Well, for those of use who still have the key :P. Meaning, if you push the switch, nothing will happen correct? unless the key is in the RUN posistion?
Dixie- this set-up works with the key correct? Well, for those of use who still have the key :P. Meaning, if you push the switch, nothing will happen correct? unless the key is in the RUN posistion?
#7
Member
Join Date: Oct 2011
Location: Appleton, Wisconsin
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 L
Just did this in my '96 but I haven't taken the lock plate off of my steering column... so i need my keys still too. I will be very happy once it's fully functional!
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Oct 2011
Location: Warrenton MO
Posts: 1,467
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.7L I6
have to take lock plate off for no key.
also you will need to take the other wire on that plug ant tie them into the power wire otherwise you wont have accessories turning on.
pics should be there on the write up page one when it gets ok'd
also you will need to take the other wire on that plug ant tie them into the power wire otherwise you wont have accessories turning on.
pics should be there on the write up page one when it gets ok'd
#9
CF Veteran
Join Date: Aug 2010
Location: The Florida State University
Posts: 8,387
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Dixie- this set-up works with the key correct? Well, for those of use whose key is not broken in the ignition :P. Meaning, if you push the switch, nothing will happen correct? unless the key is in the RUN posistion? I want to keep the key
#10
Member
Join Date: Oct 2011
Location: Appleton, Wisconsin
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 L
All of the electronics can be turned on with the switch, but the steering wheel will lock if rotated too far without the key.
#11
CF Veteran
Thread Starter
Join Date: Oct 2011
Location: Warrenton MO
Posts: 1,467
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.7L I6
have to use key for the steering wheel to work and with my method of only using the red and yellow wire then none of the accessories will have power without key too.
#13
CF Veteran
Join Date: Aug 2010
Location: The Florida State University
Posts: 8,387
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
Great! I wanna do this just for a "cool" mod. And besides, quick, cheap and easy. But, I need the key caue it seems like people have sticky fingers in south florida
#15
CF Veteran
Join Date: Aug 2010
Location: The Florida State University
Posts: 8,387
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
They make switches that are easily removeable... or even put the starter swtich with and nline fuse, then just take the fuse with you.
Something like this for the kill switch if you wanna go above and beyond...
http://www.autotoys.com/x/product.php?productid=4417
Something like this for the kill switch if you wanna go above and beyond...
http://www.autotoys.com/x/product.php?productid=4417