Bump-steer experts needed
#46
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I have one more question before I start to drill the track bar mount to match the dragling. What exact part of the tierod end is it that I am trying to align the track bar bolt with? The bottom of the TE? The pivot boot? The center of the Pitman Arms?
I want to make the two as closed to the same plane as possible.
I want to make the two as closed to the same plane as possible.
#47
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Florida
Posts: 759
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Thanks Hennessy. I think I got it now. I'll report back Saturday with pics if this rail stays away here in FL. DAMN bosses boat is blocking the warehouse garage door. I have to work outside.
#48
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Florida
Posts: 759
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I did the string check. Looking at them, they look pretty darm close to me, unless I'm not getting it. What do you think? Keep everything where it is at and look elseware?
#49
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Looks pretty close actually, make sure your strings are as close to the centers o the tie rod ends and bolts as possible.
#50
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Florida
Posts: 759
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
They are as close as I can get them. I don't think removing the drag link and track bar will make a measurable difference. I'll look for problems else ware. Thanks for the help!!!!
Thread
Thread Starter
Forum
Replies
Last Post
2000CHERO
Modified XJ Cherokee Tech
20
10-12-2015 11:03 PM
william50
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-31-2015 02:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)