Sep 21, 2015, 02:17 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
Was this a poor attempt at being smarta**?
You got a vague response because you obviously made no effort to figure it out for yourself.
Had you taken the time that it took to post here, read my post then reply with your smart response you could have found that 06 Rubicon shocks are 21" extended 13" compressed for the front and 19.96" Extended & 12.8" compressed for the rear.
Stock XJ shocks are 21.25" extended 13.0" collapsed for the front, 21.5" extended 13.4" collapsed for the rear.
Now, you have the information needed because I took 5 minutes out of my busy schedule to answer you. It seems that they are, in fact, very close to the same as the shocks that you already have.
You can contact your fellow Craigslist buddy and arrange a meeting time.
I'm glad that I had the opportunity to assist you today, Sir.
Have a nice day.
CF Veteran
Joined: May 2011
Posts: 1,458
Likes: 2
From: Glendale,Az
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
They both will sag your stock spring pack over time. If you have newer good condition spring pack I'd say go shackle. If its worn out a little more go with add a leaf but just k ow its better to do it with newer firmer packs rather than the factory sagging equipment.
Seasoned Member
Joined: Jun 2012
Posts: 261
Likes: 0
From: Hartland Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Originally Posted by DESERTXJ206
They both will sag your stock spring pack over time. If you have newer good condition spring pack I'd say go shackle. If its worn out a little more go with add a leaf but just k ow its better to do it with newer firmer packs rather than the factory sagging equipment.
CF Veteran
Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by rockdoon
Yeah i plan on first replacing my leafs as there extremely warn out
CF Veteran
Joined: May 2011
Posts: 1,458
Likes: 2
From: Glendale,Az
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
Originally Posted by rockdoon
Yeah i plan on first replacing my leafs as there extremely warn out
Seasoned Member
Joined: Jun 2012
Posts: 261
Likes: 0
From: Hartland Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Originally Posted by DESERTXJ206
If you plan on replacing you worn springs get a good set that will last. You get what you pay for and rough country tend to sag quickly.
Seasoned Member
Joined: Jun 2012
Posts: 261
Likes: 0
From: Hartland Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Ok i just wanted to check, if i went with these leafs in the back would it raise it 2" thats what the discription appears to say but i dont want to purchase something and it be wrong lol
http://www.quadratec.com/products/16090_5054.htm
http://www.quadratec.com/products/16090_5054.htm
CF Veteran
Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by rockdoon
Ok i just wanted to check, if i went with these leafs in the back would it raise it 2" thats what the discription appears to say but i dont want to purchase something and it be wrong lol
http://www.quadratec.com/products/16090_5054.htm
http://www.quadratec.com/products/16090_5054.htm
Last edited by bhennessee1; Sep 5, 2012 at 11:11 PM.
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by rockdoon
If i went with a 2 inch lift would AAL or shackles be better
Seasoned Member
Joined: Jun 2012
Posts: 261
Likes: 0
From: Hartland Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Originally Posted by bhennessee1
Those will work perfect, you will also need bushings, which are on that same page. But they make a full 2 inch lift kit with shocks coils and leafs.