Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
Member
Joined: Jul 2012
Posts: 115
Likes: 0
From: Albuquerque, New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
Hey guys,
I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?
I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?
Last edited by denbjornen; Aug 29, 2012 at 11:37 PM.
CF Veteran
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by denbjornen
Hey guys,
I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?
I've got a rough country 3" lift in the front. But in the rear, I have around 5-5.5 inches. I want to level out the front of the truck using coil spacers. 2" to be specific. Is this a good idea? Are the shocks long/big enough to handle that much? Will my control arms be too short?
Member
Joined: Aug 2012
Posts: 224
Likes: 0
From: South Jersey
Model: Cherokee
Engine: 4.0L Straight 6
Originally Posted by Tom95YJ
Just by the daystar extended bumpstops and flex it out if it rubs glue a hockey puck to the coil pad and try again. Just make sure you are not bottoming out your shocks before you hit the bumpstop
Member
Joined: Jul 2012
Posts: 115
Likes: 0
From: Albuquerque, New Mexico
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
I run 2" spacers and have never had any issues. If the control arms are stock then it'll be best to change them, if they came with the kit you can still use them. The ride won't be as nice though. Unless you frequently disconnect your sway bar and really flex, the shocks should be fine too.
CF Veteran
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by denbjornen
Will the ride improve if I get control arm drop brackets?
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
I ran drop brackets for about 2 years.
I can tell you two things:
1. At 5.5 inches of lift... drop brackets will SERIOUSLY improve your ride and handling.
2. Unless you're running the Rubicon every day and crawling 3 foot diameter boulders then I BET you'll never hang up on the drop brackets. They're so close to the wheel that it takes some fancy situations to hit them on anything. Average trail riding won't do it.
Make that three things...
There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
CF Veteran
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
If you say so...
I ran drop brackets for about 2 years.
I can tell you two things:
1. At 5.5 inches of lift... drop brackets will SERIOUSLY improve your ride and handling.
2. Unless you're running the Rubicon every day and crawling 3 foot diameter boulders then I BET you'll never hang up on the drop brackets. They're so close to the wheel that it takes some fancy situations to hit them on anything. Average trail riding won't do it.
Make that three things...
There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
CF Veteran
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
There's a big difference in how things need to be done between 3.5" lift and 5.5" lift... There's more to it than "only 2 inches"
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
And not necessarily. I started off with 2" spacers in my first XJ then got a pro comp 3" kit. That gave me pretty much the same set up he's looking to get. I ran the shocks and control arms that came with the 3" kit and it worked fine. Flexed well enough, but it rode like a brick lol. Sure you can argue fine points, but I was speaking from a suspension p.o.v. Adding 2" spacers will not mandate other changes. But id you want to take others things into account, then he'll be looking at longer brake lines, some sort of SYE, stuff like that.
CF Veteran
Joined: Feb 2012
Posts: 1,222
Likes: 1
From: Buffalo, NY
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
I had drop brackets but needed more cool points so I now have long arms.
Right, that's my point. To do it correctly and not have it ride like a brick with square wheels... there are other things that need to be addressed.
Member
Joined: Aug 2012
Posts: 224
Likes: 0
From: South Jersey
Model: Cherokee
Engine: 4.0L Straight 6
Originally Posted by fitrider250
is it better to have wide tires or tires still in fender?
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0




